
Military marking films, letters & symbols
MIL-DTL-43719 marking materials & markers
PIC supplies marking materials and custom markers for equipment lettering, legends and symbols. We offer printing and cutting for decal and lettering projects, with rolls, sheets or finished markers reviewed against your MIL-DTL-43719D requirements.
Cut lettering and symbols prepared for placement on equipment.
Equipment identification • PIC
MIL-DTL-43719D
Application & removal
MIL-DTL-43719 types and permanent or temporary classes
For large letters or a multi-part graphic, the application method affects how the installer positions the marking. The type defines that method. Class 1 means permanent marking material; Class 2 means temporary material intended for later removal.
| Type | Application method | Classes covered by the specification |
|---|---|---|
| I | Pressure-sensitive adhesive bonds when applied with pressure. | Class 1 permanent; Class 2 temporary |
| II | Positionable pressure-sensitive material allows adjustment before final adhesion. | Class 1 permanent; Class 2 temporary |
| III | Heat-activated material is applied using heat and vacuum. | Class 1 permanent |
Positionable Type II material is not necessarily temporary. The intended-use notes mention letters 16 inches and larger as an application example, not a minimum size for every Type II marking. PIC reviews availability for the requested type and class, including any Type III application requirements.
Material stock & finished graphics
Marking film in rolls, sheets, letters and legends
PIC supplies marking materials and finished graphics, with the form specified for your project. You may need stock in rolls or sheets for further cutting, finished decals, or a set of letters and numbers arranged for installation.
MIL-DTL-43719 covers pigmented elastomeric marking material in roll and sheet form. The related specification sheets describe finished markers: /1 covers letters and numerals, while /2 through /4 address other legends and symbols.
Size, color, arrangement and quantity define the finished marking. A roll of raw marking film is different from a roll of finished labels ready for dispensing.

Lettering held together on a carrier sheet for application.
Transfer sheet and backing liner
Face transfer sheet
Holds the lettering in position during application
Backing liner
Protects the adhesive before application
Simplified lettering arrangement; the transfer sheet is removed after application.
PIC printing & cutting
Printed military decals and cut lettering
PIC screen prints, digitally prints and cuts decals and lettering. These services support custom legends, symbols and character shapes. For a MIL-DTL-43719 order, we review the specified film, adhesive, ink and any protective coating as a complete marking.
The film may have its own color or carry surface printing. The specification includes screenability and ink-adhesion requirements after conditioning, so a printing method alone does not establish that a particular material combination meets the requirements.
For lettering, a translucent transfer sheet can hold the characters in position while they are applied. It sits on the face and is removed after application. The backing liner protects the adhesive underneath and is removed before application.

Screen-printing equipment at PIC.
Where the marking will be used
Permanent and temporary military markings
Class 1 • permanent
Markings intended to remain in place
Permanent materials have weathering and adhesion requirements, and removal can destroy the marking. Fuel resistance is assessed under defined test conditions; the Class 1 fuel test uses the manufacturer-recommended edge sealer.
Class 2 • temporary
Markings intended for later removal
Temporary materials have specified removal and residue requirements. The surface, coating and time in use still affect removal, so Class 2 is not a promise of residue-free removal under every condition.
The intended-use notes exclude heated surfaces above 150°F and refer certain Air Force exterior applications to A-A-59485. Type III heat activation is an application process, not an operating-temperature rating. The specified tests do not establish unlimited outdoor life or resistance to every fuel.
Storage before installation
MIL-DTL-43719 shelf life at delivery
Any shelf-life records required for your order are part of the project documentation. Section 3.2 sets the minimum manufacturer-warranted shelf life remaining when the Government receives the material. Rolls and sheets must also be no more than one year old at that delivery.
12 months remaining
Rolls and sheets
Applies to all types and classes of roll and sheet material covered by the specification.
12 months remaining
Permanent Type I and II markers
Applies to finished Type I and Type II markers in Class 1.
10 months remaining
Temporary markers and Type III markers
Applies to Type I and Type II markers in Class 2, and Type III markers in Class 1.
Section 6.4 separately addresses contract shelf-life provisions and remaining-life requirements. Storage-life testing is also distinct from these delivery periods. Shelf life describes storage before use; these periods are not installed service-life ratings or a PIC warranty.
MIL-M-43719 & current revisions
MIL-DTL-43719D status and older drawing references
DLA lists Revision D with Amendment 1, dated September 19, 2024, as active. The record includes a 1998 cancellation followed by reinstatement in 2003; the old cancellation is not the current status.
The designation and revision required by the contract, including older MIL-M-43719 references, guide PIC's review. The general specification, applicable specification sheet and drawing need to be read together. A newer record does not automatically replace the revision on your drawing.
A specified hazardous-material symbol is only one part of an application’s marking requirements. A marker covered by a specification sheet does not by itself satisfy every hazardous-material marking regulation.
Work with PIC
Start your military decal or marking project
Useful details for a military-marking quote include:
- Your layout and quantity
- The specification requirements, including revision, type, class and any applicable specification sheet
- Raw material or finished markers
- Dimensions and colors
Application and documentation details can include:
- The application surface and exposure
- Any transfer-sheet or installation needs
- Required shelf-life records and inspection details
First-article inspection applies when specified, and PIC reviews the requested inspection and documentation for the order.

