Retail graphic samples
Cut marking-film letters and numerals on a release liner beneath a lifted transfer sheet, beside a film roll and arrow marker
Home

/

Mil-spec

/

MIL-DTL-43719D

Military marking films, letters & symbols

MIL-DTL-43719 marking materials & markers

PIC supplies marking materials and custom markers for equipment lettering, legends and symbols. We offer printing and cutting for decal and lettering projects, with rolls, sheets or finished markers reviewed against your MIL-DTL-43719D requirements.

Cut lettering and symbols prepared for placement on equipment.

Equipment identification • PIC

MIL-DTL-43719D

Application & removal

MIL-DTL-43719 types and permanent or temporary classes

For large letters or a multi-part graphic, the application method affects how the installer positions the marking. The type defines that method. Class 1 means permanent marking material; Class 2 means temporary material intended for later removal.

Application methods and classes in MIL-DTL-43719
Type Application method Classes covered by the specification
I Pressure-sensitive adhesive bonds when applied with pressure. Class 1 permanent; Class 2 temporary
II Positionable pressure-sensitive material allows adjustment before final adhesion. Class 1 permanent; Class 2 temporary
III Heat-activated material is applied using heat and vacuum. Class 1 permanent

Positionable Type II material is not necessarily temporary. The intended-use notes mention letters 16 inches and larger as an application example, not a minimum size for every Type II marking. PIC reviews availability for the requested type and class, including any Type III application requirements.

Material stock & finished graphics

Marking film in rolls, sheets, letters and legends

PIC supplies marking materials and finished graphics, with the form specified for your project. You may need stock in rolls or sheets for further cutting, finished decals, or a set of letters and numbers arranged for installation.

MIL-DTL-43719 covers pigmented elastomeric marking material in roll and sheet form. The related specification sheets describe finished markers: /1 covers letters and numerals, while /2 through /4 address other legends and symbols.

Size, color, arrangement and quantity define the finished marking. A roll of raw marking film is different from a roll of finished labels ready for dispensing.

Crest lettering held in position on a carrier sheet in PIC’s photo collection

Lettering held together on a carrier sheet for application.

Transfer sheet and backing liner

Face transfer sheet

Holds the lettering in position during application

Backing liner

Protects the adhesive before application

Simplified lettering arrangement; the transfer sheet is removed after application.

PIC printing & cutting

Printed military decals and cut lettering

PIC screen prints, digitally prints and cuts decals and lettering. These services support custom legends, symbols and character shapes. For a MIL-DTL-43719 order, we review the specified film, adhesive, ink and any protective coating as a complete marking.

The film may have its own color or carry surface printing. The specification includes screenability and ink-adhesion requirements after conditioning, so a printing method alone does not establish that a particular material combination meets the requirements.

For lettering, a translucent transfer sheet can hold the characters in position while they are applied. It sits on the face and is removed after application. The backing liner protects the adhesive underneath and is removed before application.

Screen-printing frame and squeegee on a PIC production press

Screen-printing equipment at PIC.

Where the marking will be used

Permanent and temporary military markings

Class 1 • permanent

Markings intended to remain in place

Permanent materials have weathering and adhesion requirements, and removal can destroy the marking. Fuel resistance is assessed under defined test conditions; the Class 1 fuel test uses the manufacturer-recommended edge sealer.

Class 2 • temporary

Markings intended for later removal

Temporary materials have specified removal and residue requirements. The surface, coating and time in use still affect removal, so Class 2 is not a promise of residue-free removal under every condition.

The intended-use notes exclude heated surfaces above 150°F and refer certain Air Force exterior applications to A-A-59485. Type III heat activation is an application process, not an operating-temperature rating. The specified tests do not establish unlimited outdoor life or resistance to every fuel.

Storage before installation

MIL-DTL-43719 shelf life at delivery

Any shelf-life records required for your order are part of the project documentation. Section 3.2 sets the minimum manufacturer-warranted shelf life remaining when the Government receives the material. Rolls and sheets must also be no more than one year old at that delivery.

12 months remaining

Rolls and sheets

Applies to all types and classes of roll and sheet material covered by the specification.

12 months remaining

Permanent Type I and II markers

Applies to finished Type I and Type II markers in Class 1.

10 months remaining

Temporary markers and Type III markers

Applies to Type I and Type II markers in Class 2, and Type III markers in Class 1.

Section 6.4 separately addresses contract shelf-life provisions and remaining-life requirements. Storage-life testing is also distinct from these delivery periods. Shelf life describes storage before use; these periods are not installed service-life ratings or a PIC warranty.

MIL-M-43719 & current revisions

MIL-DTL-43719D status and older drawing references

DLA lists Revision D with Amendment 1, dated September 19, 2024, as active. The record includes a 1998 cancellation followed by reinstatement in 2003; the old cancellation is not the current status.

The designation and revision required by the contract, including older MIL-M-43719 references, guide PIC's review. The general specification, applicable specification sheet and drawing need to be read together. A newer record does not automatically replace the revision on your drawing.

A specified hazardous-material symbol is only one part of an application’s marking requirements. A marker covered by a specification sheet does not by itself satisfy every hazardous-material marking regulation.

Work with PIC

Start your military decal or marking project

Useful details for a military-marking quote include:

  • Your layout and quantity
  • The specification requirements, including revision, type, class and any applicable specification sheet
  • Raw material or finished markers
  • Dimensions and colors

Application and documentation details can include:

  • The application surface and exposure
  • Any transfer-sheet or installation needs
  • Required shelf-life records and inspection details

First-article inspection applies when specified, and PIC reviews the requested inspection and documentation for the order.